Current location: Home » News Center » » News » FAQ » Head lamp attention

Head lamp attention

To remove and install, fuse or other parts, or do not use computer lights, to cut off the exchange and overload and ground protection.

Computer lights can not be exposed to rain or tidal wetlands.

UV (UV) radiation and bulb explosion

Computer lights must not be used when the lens and cover are missing or damaged.

When replacing the bulb, open the outer cover or remove the bulb, and let the computer light cool for at least 15 minutes. Wear gloves and safety glasses to protect your hands and eyes.

No direct light bulbs.

If damaged, worn or in bulb than life before replacement.

Fire prevention

Do not short circuit temperature control switch and fuse, fuse must be replaced with the same model.

At least 1 meters away from combustible material (such as fabric, wood, paper).

Computer lights from the lighting surface shall not be less than 1 meters.

At least 0.1 meters of space around the cooling and ventilation system.

There must be no shelter in front of the camera.

The surface of the computer will be very hot, and it should be cool for at least 5 minutes before it is processed.

Never modify the computer lights or install non night sun accessories.

The ambient temperature is not more than 40 degrees Celsius can not turn on the computer lights.

Falling injury prevention

You can't carry a computer light alone.

Hanging installation, to ensure that the lamp frame can withstand 10 times the weight of all computer light.

Make sure all the outer cover and mounting parts are stable, and use the safety rope.

When installing or removing the computer light, the work area is to prevent outsiders from entering.


Keywords in the article: Stage light,moving head light,home party,mini moving head light,street light,flood light
广东快乐十分计划任三 秒速时时彩软件一点击进入 bet365体育在线备用 澳洲幸运10单双回血计划 黑龙江时时彩三星012 陕西快乐十分玩法与奖金表 搓麻将表情包 福彩3d字谜图谜总汇图 捕鱼王者归来官网客服 福彩幸运快三帮投如何 越南河内5分彩官网地址 篮球比分直播 河北麻将推倒胡玩法 内蒙古快3下载安装到手机 北单预测 期货风险控制管理办法 黑龙江36选7开兑奖